Add-Eco 5505 is Silicon Free defoamer Emulsion. It is Liquid Defoamer based on Mineral Oil and Anionic Surfactant. It is ideally suitable for Chemical Process from neutral pH too high alkalinity.

In addition to destroying foam, Add-Eco 5505 also controls re-generation of foam.

Application & Dose Level:

• Distempers / Water Reducible Primers / Emulsion Paints / Overprint Varnishes - 0.2 to 0.5% is sufficient to Deform. It is advisable to split the addition of Defoamer by adding half of the determined quantity to the Pigment Premix prior to Dispersion. Balance can be added at Let-down Stage
• Cement Admix – 0.3 to 0.8% depending upon Foaming Tendency of Surfactants incorporated
• Adhesives – 2 to 3% recommended based on the total weight of the Latex Solids
• Chemical Processes – Dosage depends on the degree of Foaming

Other Applications:

• Textile Processing, Pigment & Dyes, Pigment Emulsion, Paper Pulp Processing & Finishing, Water Treatment

• 0.3 to 1.0% is sufficient to burst the Foam. However, final dose level will vary depending upon type & quantity of Foaming Surfactant present in the system. It is suggested to determine Final Dose Level by conducting Trials.

• Pulp & Paper Processing
• Printing Inks
• Paints
• Latex Emulsions
• Latex Binders for Carpets
• Adhesives
• Paper Coating Operations
• Lubricating Oil Industry
• Textile Finishes
• Water Treatment
• Effluent Plants
• Vat Dyes
• Aqueous Pesticides
• Fertilizer